What is the solution of BMW x6 fault 28a0?

When the fault code 28a0 appears on the BMW x6, it means that there is absolute pressure in the automobile intake pipe, which means that the pressure is too high. It is usually caused by engine failure.

ISTA first detects whether fault codes of adjustable camshaft control device, electronic valve control system, low pressure, fuel tank exhaust valve or other fault codes of throttle valve are recorded in the fault code memory of DME (engine electronic servo control system). If there are these fault codes, please deal with them first. Precautions about the test module of electronic valve control system: After eliminating other fault codes mentioned above, test the vehicle again to verify the fault.

If the fault cannot be eliminated, the following steps should be followed: 1. Check whether the fuel tank exhaust pipe is inserted correctly. 2. Check whether the fuel filler cap is sealed. If the sealing cover of the oil pipe joint is not sealed properly, it should be replaced. 3. Check whether the air inlet pipe is sealed. 4. Check whether the crankcase is fastened. 5. Check the intake valve for carbon deposition with the aid of an endoscope.

BMW X6 is defined as SAC, namely SportActivityCoupe. Compared with X5, which pays attention to road driving performance, X6 has a more thorough evolution in road performance, and combines the sports ability of sports car and the versatility of SUV in shape design and power control.

Million car purchase subsidy