Where is the Nissan Toure cruise switch?

The cruise control switch of Nissan Toure of Pacific Auto Network is located on the multifunction button of the steering wheel. The reason why cruise is equipped with constant speed is to reduce the fatigue of drivers, avoid the fluctuation of engine speed, improve fuel economy, and at the same time accurately control the driving speed of cars to avoid speeding. After the cruise mode is started, the engine of the car will be controlled by the computer, and the computer will constantly adjust the running state according to the road conditions and the driving resistance of the car, so that the car will always keep running at the set speed.

Nissan Toure cruise is equipped with cruise control on the multi-function button of the steering wheel. The reason is to reduce the driver's fatigue, avoid the fluctuation of engine speed, improve fuel economy, and accurately control the driving speed of the car to avoid speeding.

How to use Nissan Tiida: Just turn on the switch on the right side of the steering wheel, and the cruise needs to be above 40/h to work. +-indicates acceleration and deceleration. When the speed exceeds 40/h, press the switch and the system will start to work. If you dial up, it will speed up and then slow down. When you step on the brake, the speed can reach the set speed.

CRUISECONTROLSYSTEM is abbreviated as CCS, also known as cruise control device, speed control system, automatic driving system, etc. Its function is: after turning on the switch at the speed required by the driver, it can automatically maintain the speed without stepping on the accelerator, so that the vehicle can run at a fixed speed.

With this device, the driver does not need to control the accelerator pedal after driving on expressway for a long time, which reduces fatigue, unnecessary speed change and saves fuel.

Due to the development of automobile technology, more and more cable throttle control methods are quickly replaced by electronic throttle control methods. Cable-stayed constant speed cruise is mainly composed of control switch, control module (cruise computer) server (mechanical actuator).

The working principle of the cruise control system is simply that the cruise control module reads the pulse signal sent by the vehicle speed sensor and compares it with the set speed, so as to send instructions to the servo to mechanically adjust the increase or decrease of the throttle opening to keep the vehicle at the set speed all the time.

(Photo/Text/Photo: Pacific Auto Network Q&A called Beast)