How to repair the leakage of hose at the bottom of wall-hung boiler

When the hose at the bottom of the wall-hung boiler leaks, it needs to be repaired as soon as possible, otherwise it will affect the normal operation of the furnace and even cause greater damage. Here's how to repair the leakage of the hose at the bottom of the wall-hung boiler:

Step 1: First, determine the leaking fixture.

When repairing the hose at the bottom of the wall-hung boiler, we must first determine whether the leaking device is the hose falling off or the pipe joint is loose. You can twist the hose gently by hand to check for movement or obvious cracks or damage.

Step 2: Clean up the water leak.

After determining the location of water leakage, it is necessary to carefully clean the leaking surface to ensure that the surface is clean and dust-free so as to facilitate the next repair work.

Step 3: Replace hoses or fastening joints.

If the hose falls off or is damaged, it needs replacement. You can buy a hose with the same model as the original hose for replacement. To install the hose connector in the correct direction and position, tighten the connector with a wrench.

If the pipe joint is loose, the joint needs to be tightened. You can tighten the joint screw with a wrench to ensure that the joint is firm.

Step 4: Check

After the maintenance is completed, it is necessary to check whether there is water leakage at the bottom of the wall-hung boiler again. If the water leakage problem has been solved, you can restart the trial operation of the wall-hung boiler.

In short, when repairing the leakage of the hose at the bottom of the wall-hung boiler, we should first attach great importance to safety, because it involves gas, which may inadvertently cause certain risks. If you can't repair it successfully or worry about safety, you'd better ask professional technicians to repair it in time.