How to clean engine water?

How to clean the inlet water of the engine?

1. If the water intake of the engine is not serious, only part of the water is filtered by the air filter, then just clean the water vapor on the air filter, cylinder and throttle.

2. If the engine water intake is a little more, it will not affect the normal running of the vehicle, but the engine sound is loud. It may be that gasoline and oil are mixed with a small amount of water. The owner should change the oil as soon as possible and clean the engine related accessories.

3. If there is a lot of water in the engine, but the car won't start and the engine is not damaged, we need to drain the water, clean the inside and reload the oil.

Symptoms of engine water intake.

1. Turn off the engine while driving. When water enters the air filter element of the engine, the intake resistance will increase, and when water enters the combustion chamber, the spark plug will not ignite. After water enters the distributor cover, the distributor loses its normal ignition function, which leads to the flameout of the car during driving.

2. The respirator tube is overheated. There is water in the crankcase, too. Theoretically, the intake cylinder of the crankcase should also enter. Assuming that the cylinder does not enter, only a small amount enters the crankshaft chamber (the oil seal will be broken when the engine starts). In winter, it will freeze and block the oil pipe, and in summer, it will destroy lubrication and lead to overheating, but the hot air should come out of the crankcase breather pipe.

3. The brakes are out of order. Increase the humidity of rain and air. If water enters the brake fluid and vaporizes at high temperature, it will cause braking failure or even failure. Million car purchase subsidy