How to adjust the valve clearance of Lifan 1 10 manual clutch tricycle?

The valve adjustment method of Lifan 1 10 three-wheeled motorcycle is no different from other similar motorcycles. First, remove the inspection holes on the magneto cover, the valve cover of the cylinder head and the inspection holes on the timing sprocket cover, rotate the magneto counterclockwise, align the T point of the magneto with the inspection hole of the magneto cover, mark the timing sprocket point in front of the cylinder head, so that the piston is at the compression top dead center, and then the valve rocker arm is in a relaxed state. If the rocker arm of the valve is too tight, the rocker arm will move when the magneto shakes slightly, so it is necessary to turn the crankshaft for another turn, re-align the line at point T, and the rocker arm of the valve is in a relaxed state, and then the valve can be adjusted.

If the valve clearance is incorrect, loosen the lock nut of the adjusting screw of the valve rocker arm first, and then turn the adjusting screw to adjust the valve clearance to the specified value (1 10 motorcycles usually adjust the intake and exhaust valve clearance to 0.05mm). Finally, turn the magneto several times and readjust the timing. After checking the valve clearance, you can install all parts and start the engine.

Adjusting the valve clearance requires certain professional maintenance techniques and tools. Non-professional maintenance personnel are not recommended to adjust themselves. It is best to go to the after-sales or motorcycle repair place for maintenance.