How to open the engine compartment of Chuanqi GA4 and clean it?

How to open the engine compartment of 202 1 Chuanqi GA4;

1. Find the handle switch near the driver's pedal, pull the unlock handle, and the engine cover will open a gap;

2. Go to the front of the car, put your hand into this gap and pull the safety switch. At this time, you can lift the engine compartment cover upwards;

3. After the lock of the hatch cover is opened, support the support rod of the engine compartment, and then put one side of the support rod into the support notch of the hatch cover to support the engine compartment cover. (If the vehicle is equipped with a hydraulic support, manual support is not required. )

It is easier to close the engine compartment than to open it. Hold the hood by hand and loosen the hood support rod at the same time. If it is hydraulic, this operation is unnecessary, and the engine compartment cover is lowered slowly. Finally, put your hand on the top of the engine compartment cover, press the lights on both sides, hear the click of the safety buckle and close the engine compartment.

Cleaning technology of Chuanqi GA4 engine compartment

If the car runs on the road for a while before the engine compartment is ready to be cleaned, let the engine cool down first to prevent the engine from overheating and scalding.

Clean the dust and sundries on the surface.

Clean the engine surface with a brush before cleaning.

Remove oil stains.

When the engine is running, it is easy to produce oil stains, and once the oil stains solidify, it is difficult to clean them. Spray a special cleaning agent on each part to soften and decompose it, and then wipe it with a wet cloth. Spray more detergent on particularly dirty places and brush with a small brush.

Rinse with water after cleaning.

Wash with warm water when washing. When the water pressure is high, it is easy to cause quenching phenomenon, deformation of cooling network, fracture of wire harness and water inflow at live fire hydrant.

Glass protection

After cleaning, thoroughly wipe all parts of the engine compartment with a clean cloth, and finally care for the plastic part of the engine with polishing agent.