Jinbei Hercules fault code p2 135

P2 135 electronic throttle position sensors 1# and 2# have line correlation faults. ECM compares the input signals of TPS 1 sensor and TPS2 sensor, and the sum of the two input signals is close to 5V at any time. If the ECM detects that the sum of TPS 1 and TPS2 signals is significantly different from the theoretical value, it will report the fault code. 48638.66666666666

4. Diagnostic steps 1 Check whether the system has other fault codes related to TPS system. Step 2: Check the voltage signals output by sensor TPS 1 and sensor TPS2. Step 3 Check the power supply circuit and ground circuit of ECM Step 4 Use a scan tool to confirm whether the fault code is stored again.

There is also frv fault code p2 135. Under normal circumstances, the "exhaust system fault alarm light" is on. This kind of problem is easy to solve. First, check whether the engine oil is pure, and then check whether the exhaust emission is up to standard. Generally, it is caused by incorrect engine oil, and it will be fine if the engine oil is changed.

Another fault code means that the throttle position sensor is faulty, so it is recommended to check the electronic throttle circuit.