How to disassemble the armrest box in changan cs35?

Pacific Auto Network first opens the central armrest box, takes out the cover pad and two 10# screws, and then tilts the plastic cover next to the handbrake with a plastic screwdriver. There is a plastic buckle inside the armrest box, which can be taken out and covered.

Remove the cigarette lighter cover: there is a gap in the position indicated by the screwdriver. Take the gap as a breakthrough, and use a plastic screwdriver to remove the cigarette lighter cover. There are no screws, they are all fixed with buckles, and they can be removed by prying.

Remove the fixing screws: After removing the cover plate of the cigarette lighter, you can see two screws for fixing the armrest box 10#. Use the tool 10# to remove it, and then install the screws in place. Then separate the three plugs and take off the cigarette lighter cover.

Dismantle the fixing buckle of the armrest box: There is a plastic buckle on the innermost side of the armrest box of the first and second drivers, which is removed with tools.

Dismantle the handle: first hang it in N gear, and then lift it forcibly, at this time, the handle is separated from the handle core. But there is also a stop for fixing the cover plate, so it can't be taken out for the time being. You need to use a plastic screwdriver to remove the cover. Finally, separate the two plugs, remove the handle and cover plate and put them away.