How to install excelle battery?

1. Unpacking and inspection

Handling: it is forbidden to be stressed at the terminal to prevent the terminal from being damaged and the sealing part from cracking;

Avoid battery inversion, drop or impact;

Do not use metal wire such as steel wire rope to prevent battery short circuit.

Inspection: appearance of packing box and battery-no damage;

Spot check: battery quantity and accessories-neat and complete;

See: instruction manual, installation drawing and precautions.

2. Precautions before installation

After checking that the battery is normal, install it in a designated place (such as a battery room);

If the battery is placed in the battery room, it should be placed as low as possible in the battery room;

Avoid installing batteries near heat sources (such as transformers);

Because the battery may produce flammable gas during storage, it should be installed away from devices that generate sparks (such as fuses);

Before connection, polish the battery terminal to make it appear metallic;

Be careful that conductive materials short-circuit the positive and negative electrodes of the battery.

When multiple batteries are used together, first ensure the correct connection between the batteries, and then connect the batteries with the charger or load. In this case, the positive pole of the battery should be connected to the positive pole of the charger or load, and the negative pole should be connected to the negative pole. If the battery is connected to the wrong charger, the charger will be damaged. Be careful not to connect it wrong. Remember to connect correctly.

Pay attention to the firm connection when wiring, but don't use too much force to avoid damaging the terminal. Don't use too much force at the terminal, and every connecting nut and bolt must be tightened.