How to disassemble Angola's intake manifold?

1. Disassemble the intake pipe assembly: unscrew the fixing bolt of the intake pipe assembly 1. Take out the intake pipe assembly and tighten the bolts.

2. Unplug the connecting plug of the throttle control unit.

3. Unscrew the fastening bolt of the throttle control unit and remove the throttle control unit.

4. Pull out the vacuum hose 1 connected to the brake booster on the intake pipe, loosen the clamp (arrow) and disconnect the vacuum pipe connected to the activated carbon canister on the intake pipe.

5. Unplug the connector of the intake manifold pressure sensor, turn the bolt, and remove the intake manifold pressure sensor.

6. Unscrew the fixing bolts on the intake manifold bracket.

7. Disconnect the wiring harness on the intake manifold.

8. Turn the fixing bolt (arrow) of the air inlet pipe and remove the air inlet pipe together with the gasket.