Is it difficult for MG zs to clean the throttle?

MG zs cleaning throttle valve is not easy to disassemble. The correct process should be to completely remove the throttle valve for cleaning. There will be a plug next to the throttle, which needs to be pulled out before removing the throttle. For vehicles that don't unplug frequently, the plug may be tight and difficult to unplug. At this time, you can pry open the periphery of the plug with the help of a small screwdriver, and the whole plug can be easily taken out after loosening.

Throttle cleaning cycle:

Under normal circumstances, it is recommended that the owner clean the throttle at about 20,000-40,000 kilometers, but this is only for your reference. The specific cleaning cycle depends on the air environment in the car, the type of oil used, the interval between replacing air filters and driving habits.

Symptoms requiring throttle cleaning:

If it is found that the air intake of the engine is insufficient, the engine idling is unstable, the feeling of suddenly turning off the throttle when driving, the power is reduced, and even it is difficult to start, and the fuel consumption is increased. Maybe the throttle valve needs cleaning.