Haval h6 throttle matching method

Haval h6 throttle matching requires the use of a dedicated or universal decoder. Clear the empty original data and identify the new data according to the decoder prompt. It is recommended that the owner send the car to a shop with professional equipment to clean the throttle. After cleaning, the repair shop will match it for you. Throttle matching is to write the actual throttle data into the computer board, which is called throttle matching. In order to make the engine better adjust the idle speed, control the fuel injection and adjust the shift point, the computer needs the throttle to input the state data in real time. When the data changes, the computer will automatically adjust the throttle data value. If it exceeds a certain value, the engine will work abnormally. At this time, it is necessary to clean the throttle and write the latest throttle state data into the computer board, so that the computer board can adjust the working mode according to the new data. It is not difficult to manually match the Haval h6 valve. Open the second gear of the key. This is the gear where the indicator light is fully lit. Then wait for 20 seconds to press the accelerator to the bottom and keep it 10 seconds or so to release the accelerator, turn off the ignition switch and pull out the key to initialize.