Cleaning method of KIA k2 throttle valve

How to disassemble, clean and clean KIA k2 accelerator R

Remove the throttle as follows:

1. Remove the connector and pliers between the intake pipe and the air cleaner box.

2. Remove the crankshaft ventilation pipe and use the T20 internal wrench.

3. Remove the empty filter box and break it by hand, then you can clean the upper part of the throttle. If you want to clean it thoroughly, please remove the four screws and the throttle.

KIA k2 throttle cleaning method is as follows:

Step 1: Prepare tools: a 10 small wrench (assembling and disassembling the battery terminal), a large Phillips screwdriver (assembling and disassembling the air inlet elbow), a T30 internal wrench (assembling and disassembling the throttle valve) and a bottle of carburetor cleaner.

Step 2: Remove the throttle inlet elbow.

Step 3: Unplug the throttle harness plug.

Step 4: Remove the throttle body.

Warm reminder of automobile throttle function: control the air intake, and the fuel quantity can be automatically controlled through the throttle position sensor. In other words, it is the device that controls the throttle.

Classification: one is to control the semi-mechanical and semi-electronic throttle through the cable, and the other is to send a signal to the full-electronic throttle through the sensor, and calculate the throttle opening through the angle of the air inlet and sensor through the computer.