Function of joysticks on both sides of automobile steering wheel

The operating lever on the left side of the car is mainly used to control the lights. Snapping up and down is the left and right turn signals and brake lights of the car, and pushing back and forth is the far and near light conversion of the car.

The joystick on the right side of the car is the joystick of the vehicle wiper system, which can adjust the speed, the water spraying of the wiper and the working frequency of the wiper brush. Of course, some high-end cars have the function of constant speed cruise on the light control lever, which is just in the right position and convenient to operate; The switch button of instrument information is added to the wiper lever.

The wiper lever is used to control the front and rear glass wipers and washers. The mode knob on the operating lever is used to adjust the speed of the wiper. The faster you screw it up, the smaller it will be. The letters on the left side of the joystick are the five gears that control the windshield wiper: MlST (inching mode), OFF (stop), INT (intermittent), LO (low speed wiper) and HI (high speed wiper). The letters shown on the right are used to control the rear wiper, which is roughly divided into four gears.

Extended data:

When operating the water spraying function of the wiper control lever, if it is found that the wiper does not spray water, you should first check whether the water nozzle is blocked, and then check whether the water storage of the wiper is sufficient. In addition, don't let the wiper blow dry the glass when there is no water spray. If there are small grains of sand on the wiper, there may be many scratches.

When the wiper works normally, turn off the wiper switch, and the wiper blade should automatically return to the lower side of the windshield and stop. If the stop position is wrong, you should drive to the local service station for adjustment.