How to install Wuling solar energy and rest pedal?

Add it to the left. The left side of the clutch.

The throttle line of scooter is generally installed in the right handlebar switch, and there is an adjusting tube and a locking nut under the handlebar to adjust the free clearance of the throttle line. Under the throttle line, installed on the carburetor. Due to different structures, it can be divided into two types: built-in installation and external installation. Built-in is to install throttle pipe on the throttle body of carburetor, which is mainly seen in plunger chemical oil.

Possibility 1: the return spring f 13 is broken or inelastic. Everyone has played with the spring. If you push too hard or toss it for too long, the spring will be damaged. This kind of maintenance is relatively simple, just replace the brake pedal return spring. Possibility 2: The brake caliper piston is stuck, resulting in braking damping. The brake caliper is fixed. When braking, the caliper clamps.

Hello: It is suggested that the throttle cable of Wuling Guang Zhi vehicle is overweight, and nylon should be checked for carbon deposition or deformation, otherwise it should be replaced. Followed by the lubricating oil door return spring. The above phenomenon can also occur if the throttle shaft is rusted or stuck.

When the clutch line is loose, the pedal will vibrate. At the end of the clutch pipe, there are two nuts. Loosen the first one and twist the second one a few times. Don't twist it too much.

To install the pedals of Wuling Hong Guang, you must go to the auto parts city or repair shop.