How to install Yamaha Jinbao 150 foot starting spring?

Install Yamaha Kimball 150 foot starting spring as follows:

1. Remove the bottom of the motorcycle first. The purpose of this is to facilitate the work and avoid the spring deviation.

2. Observe the shape of the spring. One end of the spring is thick and the other end is thin. This is to be able to be stably fixed on the engine.

3. Insert the thin end of the spring into the hole of the pedal starting lever and turn it until one end of the spring catches the starting lever.

4. Fix the thick end of the spring on the engine. At this time, some strength is needed because the spring will have some tension.

5. Confirm that the spring has been installed firmly, and then reinstall the motorcycle bottom.