Does Pentium X8080 need to reconfigure the computer to clean the throttle? If you take it off, clean it up.

Do you need to reconfigure the computer to clean the 80 throttle? It is easy to remove and clean. The battery is powered off for a few minutes, and then it can be reinstalled. However, it is necessary to readjust the time and learn how to lift the window glass. It is suggested that the vehicle should clean the throttle every 20,000-30,000 km. Disassembly and cleaning are supported, and the throttle should be initialized after cleaning. Generally, the computer needs to be reset after the throttle valve of the EFI vehicle is cleaned. If you don't do it, it is likely to cause a big increase in fuel consumption. Generally speaking, the simplest reset method is to disconnect the battery cable for more than 30 seconds. I suggest you disconnect 1 min, then reconnect and run again. ? (3) However, some models can't be reset in this way, and they can only be reset after being connected to the maintenance computer through the on-board OBD interface. In this case, you can only go to the 4S shop or garage to repair the computer. Generally don't need it! @20 19