How to start the motorcycle?

The driving mode of motorcycle is as follows:

1, turn on the ignition switch, let the EFI vehicle complete the self-inspection, and then confirm the gear status of the vehicle. It is best to start the vehicle in neutral, but for safety reasons, it is best to pinch the clutch handle before starting, and it is best not to add gas to the throttle when starting, and to warm up after starting the vehicle.

2. After the vehicle is preheated, it can be started. Starting a motorcycle is relatively easy. As long as you find the access point of the clutch and control the throttle knob, it is easy to achieve. Its operation is actually relatively simple. First of all, you should hold the clutch handle and put it into first gear. By the way, observe the road conditions and slowly loosen the clutch. When you feel the vehicle shaking, you can stabilize the clutch, slowly refuel and then release the clutch, and the vehicle can start smoothly.

3. After the successful start, it is the shift of the motorcycle, which is relatively easy. Release the throttle first, then pull the clutch, quickly shift into second gear, release the clutch throttle, and repeat the above actions according to the vehicle speed, so as to smoothly shift the vehicle. Generally, 20km/h is engaged in second gear, 35km/h in third gear, 50km/h in fourth gear, 65km/h in fifth gear and 75km/h in sixth gear. Engine speed can refer to vehicle speed, because these two speeds are equal under normal circumstances.

Through the above operation, the motorcycle has been running normally, so what should I do if I want to slow down at this time? It's actually very simple. Step one, turn off the throttle and let the engine run at idle speed. Then, properly use the front brake and cooperate with the rear brake to slow down the vehicle. With reference to the increase of gear during acceleration, you can downshift in turn according to the vehicle speed.