What is the manual matching method of Nissan converse throttle?

Turn off the ignition switch and wait 10 second; Confirm that the accelerator pedal is released, turn the ignition switch to the on position and wait for 3 seconds; Step on the accelerator pedal 3 times in 5 seconds; Wait for 7 seconds, press the accelerator pedal and hold it for 20 seconds until the engine light stops flashing and lights up; Then release the accelerator pedal within 3 seconds; Start the engine and let it idle for more than 20 seconds; Run the engine at high speed two or three times.

Throttle is a controllable valve that controls air to enter the engine. After the air enters the intake pipe, it will be mixed with gasoline to form a combustible mixture, and the combustion is successful. It can be said that throttle is the "throat" of the engine. When stepping on the accelerator, the engine power is determined by the throttle opening.

Dirty throttle: the most obvious thing is the power of the engine. When the vehicle is unstable at idle speed, difficult to start, and the power drops, it means that the automobile throttle needs to be cleaned.

Matching reset is required after the throttle is cleaned: the throttle opening should be reset after the throttle is cleaned, otherwise the automobile computer has memorized the opening when there is carbon deposit. If it is not reset, the engine will have unstable idle speed and high speed, which is worse than before cleaning.

(Photo/Text/Photo: Choosing a Car Brother) @20 19