Ford Furuisi throttle installation

Ford Forex water tank is located in front of the engine, close to the front of the car behind the windward grille. If the antifreeze coolant needs to be replaced, the engine protection plate (four fixing screws) needs to be removed first. The drain valve of the water tank has a black drain screw under the bottom of the water tank. If you take it down, you can drain the water in the tank. Never remove the water tank cover when the engine is in a high temperature state. High-pressure engine coolant will be ejected from the water tank, which may cause serious burns.

The water tank filler of Furuisi is shown in the following figure: after the water in the water tank is drained, install the drain valve, fill the coolant filler in the engine compartment with new coolant, add the coolant, and then use the mixed solution prepared by diluted coolant concentrate and clean tap water in proportion. The specific proportion is indicated in the purchased coolant tank.