Traditional Culture Encyclopedia - Traditional culture - Redwood furniture woodworking master or designers to give advice under

Redwood furniture woodworking master or designers to give advice under

Personal experience sharing (also handmade). Pictures of the rocking chair, for example, first of all, in the absence of customers to provide drawings, they do not have, and there is no physical case, only to find a way to find the physical object, with cardboard (available packaging cartons to open) spread on the ground, the rocking chair side on the cardboard, with a pen along the rocking chair structure to draw out the side of the shape of the object, and then according to the parts of the side of the independent cut out model (i.e., the chair full length of the main wooden square, the chair curved feet half-moon wooden square, Armrests, chair body and feet connected to the two wooden square). Also known as 1:1 release molds. These molds are only the thickness of the sides of the wooden square, as for the width of how much, with notes can be. There is a whole rocking chair width, the size of the horizontal square do not need to put the sample, note down the size can be.

The above is 1 to 1 sampling mold production. The key in the eyelet, splicing, gluing and planing processing. For example, the chair on both sides of the full length of the curved wooden square, wavy curved, with a piece of wood to make it is impossible, only with 2 to 3 wooden square bonding barge after the release, the first eye, and then planing (because of the wavy curved, if planing processing and then hit the eye is more difficult). The bottom two half-moon wooden square is the same, at least two wooden square bonding barge. As for these need to be bonded to refute the specifications of the wooden square, the release of the mold is cut into 2 to 3 sections, you can get the specifications of the wooden square, used to purchase materials, pricing. If the first chair is completed, in order to facilitate future custom processing, available thin plywood (plywood) instead of cardboard release mold, more accurate and durable.

I have described the above process to the best of my ability, unknown whether it is in place and whether you need the answer, for reference.