How to hand polish jade at home

1, first, prepare the original stone, as shown in the picture below.

2, then, rough grinding with 180 mesh sanding strips, all the skin off, as shown in the picture below.

3, sanding with 360 mesh sandpaper, the purpose is to repair the scratches produced by the previous sanding strips, as shown in the picture below.

4, and then with 1200 grit sandpaper for sanding, the purpose is to repair the previous 360 grit produced by the large scratches to remove, as shown in the following figure.

5, and then with 2000 grit sandpaper again for sanding, as shown below.

6, in the switch to 3000 grit sandpaper again, as shown below.

7, finally, coated with toothpaste on top of the jade, rubbing back and forth with a towel, a few minutes on the surface of the mirror effect, as shown in the figure below.

8, so it's done, look at the effect, as shown below.