Internal structure of toilet

The internal structure of the toilet is as follows:

1, urinal siphon device.

Siphon will make the water in the toilet immediately enter the sewer. After the water in the toilet is gone, the air will naturally enter the siphon, and then you will hear the sound, and the siphon process will be completed.

2. Toilet flushing device.

The function of the water tank is that enough water must be poured into the urinal at a fast enough speed to promote the siphon phenomenon, and the effect is obvious. If you use ordinary household water pipes, the water will not flow fast enough-this will never form a significant siphon phenomenon.

3, toilet water device.

The water supply device uses valves to control the water switch. When the water filling float (or water filling float) descends, this valve will make water flow into the water tank. When the water level in the water tank drops, the slider will also drop.

Toilet principle

1, flushing principle: the sewage is directly discharged through the impulse of flushing water. The flushing type relies on the available water to gather evenly at the best position of the front tire with the fastest flow rate and maximum flow rate, and give full play to the maximum efficiency of the available water to seal up and discharge the dirty things.

2. General siphon flushing principle: sewage is discharged through siphon effect formed by flushing water in drainage channel.

3. Principle of jet siphon flushing: With the help of the jet hole under the water seal, the jet stream accelerates the discharge of pollutants.