How to install black group nas

1 First of all, we choose the hardware motherboard Huaqing Technology J3455B-ITX. Adapter card: PCI-E to SATA4-port Kingston 2G memory stick U disk 16G hard disk 1TB 4-disk NAS chassis black group Hui chassis power supply: Forester 500W small 1U power adapter: motherboard pin to USB2.0 expansion cable.

2. The next step is similar to our pC. Look at the power jumper on the motherboard first. The installation position is generally at the edge or corner of the motherboard, and the corresponding position will be marked on it. Other very simple installation, I don't need to say more.

3. System installation. The assembly machine is installed, and then the system will be installed. I will boot the on-chip mirror Easy-Win32 Disk Imager-EditPlus Synonym Assistant Settings -u disk, MAC computing, Qunhui DSM _ DS 3617xs _15217.pat.

4. First, make the USB flash drive startup item and get the VID and PID values of the USB flash drive. Run ChipEasy to obtain and record vID and PID values in the device id of u disk.

5. Install Win32Disklmager and run it. Select Qunhui USB flash drive to start the image, and select USB flash drive as the startup disk of the device.

6. Get the serial number and MAC address.

7. Modify the grub.cfg file. Open it with Notepad and find the following location: After modification, it means that the U disk step has been completed.

8. Install the group benefit system. Insert the prepared boot disk into the USB cable exported from the motherboard, and select the U disk device when starting. The shortcut key corresponding to this motherboard is F 1 1.

9. Wait for the navigation to load. There will be a full screen of English until the English does not move, and the lower level will appear, and the next step will be carried out.

10, install the Synology Assistant Settings -5.2-5005 application! After the installation is completed, run Qunhui Assistant and right-click search-after the host appears, you can right-click the installation or double-click the IP address to enter the installation interface.

1 1. After entering the installation interface, select manual installation. Then install DSM _ ds3617xs _15217.pat, and then click Install! The installation will take about ten minutes.

12. After the installation, enter the setting interface and set the server name, user name and password. Just set it according to your own needs.

13. Choose manual update instead of automatic installation. When setting up QuickConnect, just skip this step.

Heart of the King 2 Click on the demo.