Blinds installation steps to explain how to install blinds

Blinds are now more widely used in the decoration of a kind, it can help people block the sun at the same time also play the role of eye protection, it is because it has these many advantages, so by the majority of consumers are sought after. Below I will give you an introduction to blinds installation steps to explain and how to install blinds.

1, measure the size of the outer frame

In the measurement of the time to note that its width is measured from left to right for the measurement of the width of its outer frame, and then measure the window on the top, in the middle, the bottom of the widest dimensions, so that the measurements come out to be the outer frame is suitable for the width. If it is to measure its height, then it is from top to bottom to measure the height of the outer frame of the window, generally speaking, also to the window left, center, right the largest size, so that measured out is the height of the outer frame.

2, measuring the size of the inner frame

Measurement of the size of the inner frame, it is from the width from left to right to measure the width of the inner frame of the window, but also need to pay attention to is the window on the top, in the bottom of the smallest width of the size of the window should also be subtracted from the size of 1cm, so that the size of the measurements out of the more accurate. As for its height is also measured from top to bottom of the height of the inner frame of the window, as for its height is the size of the window left, center, right minimum height. As long as in accordance with this to determine the depth of the window to design, so as to give so that the shutter blades can be free to move, but also according to different shutters to choose its installation method. For example, like fixed or casement installation requires 8cm depth, then push and pull installation should not only take into account the width of the product blade but also take into account the number of layers. For example, like two layers of push-pull to ensure that its blade activities require 15cm depth, if it is a single then only need 10cm depth.

3, shutter installation

If the shutters are installed into the kind of fixed, which will bring great inconvenience to the cleaning, generally speaking, or do not choose the kind of fixed installation. For example, like the casement way it has a good seal, and this is also more suitable for small windows or single, two window installation. Relatively speaking, like the push-pull method will take up less space, this installation method is more suitable for general window installation.

4, blinds installation notes

This side to remind you, if you are installing the same product all the installation code must be in the front and back, up and down the direction of the same in a straight line will be more appropriate, if there is a curtain box, then be sure to pay attention to the curtain box cross-section width must be greater than 90mm to be more appropriate. And remember to push the installation code slider to the end during installation, and also note that the horizontal and vertical blinds must remember to close up, if in the middle of the installation or the last stop, then remember to pull the rope to the right 45 degrees, so that the whole curtain will automatically fasten.

Summary: blinds installation steps to explain and how to install blinds related content is introduced to this, the above details of the installation of blinds steps, in the installation process some attention to detail or to pay attention to, so that you can avoid the installation process of some of the unnecessary things happen. I hope the above introduction will help you.