Traditional Culture Encyclopedia - Traditional culture - Installation method of central heating water heater

Installation method of central heating water heater

The installation method of central heating water heater is as follows:

1. Choose a suitable location: the location of the water heater needs to be safe and convenient, and generally choose a place with ventilation, dryness, sufficient water and easy maintenance and cleaning. At the same time, it is necessary to meet the interface between the power supply and water source of the water heater.

2. Level the ground: In order to ensure the safety and use effect of the water heater, it needs to be installed on a level and clean ground. First, level the ground.

3. Installation of power cord: According to the power and use environment of the water heater, select the appropriate power cord and connect it to the power interface on the water heater through the laying channel. Generally, a three-core power cord is used, and the ground wire needs to be grounded.

4. Connecting water pipes: Select connecting water pipes with appropriate diameters and lengths and connect them to the water inlet and outlet of the water heater. Pay attention to the sequence and direction of water pipe connection, and use the button connection with hose sealant.

5. Adjust the water pressure: After the water pipes are connected, it is necessary to adjust the water pressure of the water heater, which is generally set at 0.02-0.6Mpa. At the same time, it is necessary to check the water flow and temperature to ensure that it meets the requirements of users.

6. Check the installation quality: check the stability and safety of water heater installation, the flatness reaches the standard, and there is no obvious water stain and water leakage.

7. Installation of accessories: According to the requirements of users and the characteristics of water heaters, some accessories need to be installed, such as booster pumps, sewage valves, safety valves and filters. To improve the use effect and safety of the water heater.

8. Cleaning inspection: After all installation steps are confirmed, the water heater and the surrounding environment need to be thoroughly cleaned and inspected to prevent foreign objects or impurities from entering the water heater and ensure the normal use of the water heater.

In a word, the installation of the collective heating water heater needs professional operation, and the normal operation and use effect of the water heater can be guaranteed according to the standardized installation procedures and operating rules.