Who knows the complete set of wood carving tools?

One is the "Weng Guan" blank cutter, commonly known as "wild cutting" and "blank cutter", and the other is the "drill bar" smoothing cutter, which is mainly used for digging thin blanks and smoothing. When selecting and using the above tools, we should pay attention to the difference in the thickness of the tool tip. The so-called cutter head is the actual cutting surface. The thinner the drill bit, the sharper it is, but the worse the fastness. According to this situation, the cutter head of the blank can be appropriately thicker to withstand the impact and hard digging of the hammer; The knife used for polishing is thinner. The so-called thin knife is dense, so that the wood can be carved smoothly. Auxiliary tools for wood carving: mainly refers to hammers, wood files, axes and saws. Small electric woodworking polisher and electric hand drill. Operating equipment for wood carving: it mainly refers to a particularly stable workbench and a cross-braced wooden pliers table, on which vises and G-pliers can be placed. The vice is used to chisel round carving, and the jaws must be equipped with cork plugs to prevent the carved wood and tools from being caught. G-clip is used to carve rough relief blanks. Beginners can set up some economical and simple workstations according to their own conditions, such as blank stools. Large-scale works can be flexibly operated on the ground or standing or squatting.