Dell's latest bios setup USB flash drive boot legacy mode solution (Dell notebook uefi boot setup? )

Windows 10 latest Dell bios setup diagram. Recently, a friend bought a new Dell notebook. As a result, when installing windows 10 system to set bios, it was directly blocked, because Dell's bios interface was completely revised, completely abandoning the previous style. The following small series will teach you how to set up the latest Dell bios interface.

1. Insert the USB flash drive and press F2 to enter the BIOS when starting. You can also press F 12 to enter this interface, then select BIOSSetup and press enter to enter BIOS.

2. Expand the SecureBoot subdirectory, and then click SecureBootEnable to select Ddisabled；;

3. Select BootSequence in the General subdirectory, and select legacy in the bootlist option. From top to bottom, floppy disk, hard disk, USB, CD-ROM drive and network card follow the default.

4. Then click AdvancedBootOptions, check EnableLegacyOptionROMs, click apply, and then click exit to exit, and the computer will restart;

5. If the setting is wrong, click Restore to reset the setting and select the BIOS default value; ;

6. Press F 12 to enter the startup item selection page during the restart process, and select USBstoragedevice to enter the USB flash drive.

The above is a schematic diagram of Dell's latest bios settings, hoping to help everyone.