Traditional Culture Encyclopedia - Traditional culture - How to install the fire pipe?

How to install the fire pipe?

1, in the installation before, is the need for fire pipe rust work, and in the rust, need to do the surface of the pipe paint work, this time to ensure that the uniformity of the paint, there can not be a leakage of the brush.

2, will be welded to the mouth of the steel pipe position, this time according to the relevant requirements for welding work, and by professionals.

3, hydrant pipe bracket installation, note that before installation, the need to paint the surface of the hydrant pipe.

4, and then the installation of pipe supports. This time you need to carry out the adjustment of the upper and lower plumb line, and do a good job of measuring and fixing work to ensure the verticality of the pipe. If there is a problem with the verticality, there will be many problems later, affecting the use.

5, the inner pipe fixed bracket steel plate is to be customized in accordance with the requirements, so as to ensure sufficient firmness. After installation, need to carry out appropriate repair work to ensure that the aesthetic effect.

6, if the pipe is not cut bevel, then in the welding, to leave a gap of 1 to 2mm. And the inner tube of the fire hose and its bracket must be fixed, so as not to be in the late tight phenomenon, affecting the use.

7, if the height of the fire hose is more than 5m, then the inner pipe is only a bracket is no matter, it is necessary to install two brackets.

8, then install the fire ring pipeline, then pay attention to make the hydrant pipe can be cross-layout and bridge, forbidden to overlap, otherwise it will affect the normal use. When it is done, do the anti-corrosion treatment work, it can be.