How to adjust the drift of fishing, how to adjust the drift of fishing

1. Assemble the wire assembly and install the float and double hook. The float is about 30 cm away from the sub-line. Add lead (extra) to the lead base and pull the float into the water.

2. Adjust the distance between the float and the auxiliary line until the float is 1-2 mesh above the water surface (find the bottom).

3. Pull the float up 20 cm, and then the float will sink to the bottom again.

4. Cut off the lead skin gradually with scissors until the floating tail reveals the desired mesh number (such as 3 mesh or 4, 5, 6, 7 mesh), which is the number of "tune" adjusted several times. The specific mesh number should be comprehensively considered according to the performance of the float you use, the target fish, the season, the severity/fierceness of the fish mouth and many other factors. Remember to wrap the lead cover tightly on the lead cover seat after adjustment.

5. Hook the earthworm on the double hook, and pay attention: the earthworm on the hook should keep the general size every time. At this time, the float will sink into the water again under the gravity of the earthworm, and gradually adjust the float until the tail of the float comes out of the water to reach the number you want, that is, adjust the number of "grabs" several times. For example, if you show your eyes, you will catch 1.

6. The above are the most basic bleaching methods, so you should learn so much first. The so-called "four fishing and two fishing" is a simple formula set by the earliest dharma drift, which is not suitable for the current fishing method. The specific adjustment of several catches needs specific analysis. This is a complicated theory. Take your time.

Suggestion:

1. Float is made of balsa wood or reed.

2. Floating-point numbers should be between 0 and 2 and should not exceed 2.

If it is traditional fishing, level the water with an empty hook (or 1 mesh), and then fish with 1-2 mesh.

The standard of float reflects the severity of fishing in Taiwan Province. Traditional fishing for crucian carp is float, while carp is black float. But the reflection of floating is ever-changing, and we need to accumulate experience in practice!