The right way to polish a fishing rodThe right way to polish a fishing rodVideo

1, regular manufacturers or high-grade rods have the instructions for the use of the maximum sub-line, strictly in accordance with the requirements of the use of the sub-line, even if the fishing on the very big fish or occasional bottom, cut off the sub-line after the force, it protects the rod, so do not arbitrarily increase the strength of the sub-line.

2, to reduce the intensity of the rod force, the fishing rod should not be too fierce, but also try to avoid directly lifting the fish to the shore and will be hooked on the fish out of the water. You should be able to avoid the direct lifting of the fish to the shore and the hooking of the fish to the surface. If you need to adjust the position of the float during the fishing process, you must first collect the rod, one hand pinch the upper part of the drift seat line, the other hand pull the space bean and the drift seat, to avoid the force of the rod. If there are big fish in the fishing waters, the fishing rod should be equipped with a lost line to avoid the big fish pulling away the rod, causing unnecessary trouble.

3, to keep the rod clean whether it is a hand rod or a sea rod, the best use of a piece of clean soft cloth to collect the side wipe. Prevent mud and water stains into the wall of the rod tube, resulting in rod wear and tear and scratched paint. Sea rod on the metal card, should pay more attention to not let the water, to prevent rust, it is best to use oil cotton wool to wipe after each fishing.

4, to prevent man-made accidents, fishing, should also pay attention to prevent stepping on the ground on the rod. Prevent the fish dragged the rod on the ground friction, support the rod, to prevent being dragged into the water by the fish. These are all common things that should cause anglers to pay attention to.