Causes and treatment methods of non-ignition of gas stove

Causes and solutions of gas stove fire;

1, the pulse ignition cooker doesn't catch fire (although there is ignition sound) mostly because the battery is dead-just change the battery.

Replacement method: there is a battery box near the lower left corner of the gas stove chassis, and there are two battery boxes in the lower right corner of the chassis. Just replace the new TV 1 and it can be used immediately under normal circumstances.

2. Inappropriate ignition needle placement or too far ignition distance will cause the cooker to fail to catch fire.

Solution: Rotate the inner cannon cover at a proper angle to ensure that the ignition needle can point to the air outlet on the upper cover. Generally speaking, the distance between them is about 4-6mm;

3. Rust or stains on the ignition needle of the gas stove may affect the ignition.

Solution: Scrape the ignition needle and internal fireworks with metal sheet to expose them to the metal surface for ignition. In addition, if the ignition needle is damaged due to the breakage of the ignition needle, the problem can be solved by replacing the ignition needle.

4. If the ignition needle and flameout protection needle can't catch fire, it depends on whether the nozzle of the gas stove is blocked.

Solution: For nozzle blockage, you can remove the fire cover, clean up the accumulated oil and impurities in the air holes with toothpicks or old toothbrushes, and dry them until they are completely dry.