How to replace the ordinary chandelier by yourself

1, turn off the power switch, remove all bulbs, and then remove the cover plate of the lamp holder. There will be two wires in the ceiling box. Cut the wires with oblique nose pliers.

2. Remove the lamp hanging plate with a screwdriver, and there will be two screw holes. Under normal circumstances, the spacing of the screw holes should be consistent, and a new lamp can also be used. If not, it is necessary to measure the screw spacing of the new lamp hanging plate and re-punch it with an electric drill.

3. Lock the hanging board attached to the new lamp in the screw hole, and peel off a copper wire about 2 cm from the two wires on the base and the two wires on the ceiling of the new lamp with a wire stripper.

Fix the lamp on the hanging board with a rope first-otherwise another person will hold the lamp high. Wrap the copper wire and ceiling wire of the lamp together separately, and then wrap the copper wire with insulating tape to ensure that the copper wire is not exposed.

5. Remove the rope, put the wire into the cover plate, and then damage the cover plate nut connected to the damaged lamp.