Zhongyi Edge Banding Machine with Punching Function

Thermal Transfer Edge Banding Machine is a woodworking machine which integrates milling, grinding wheel, sanding, primary transfer, secondary transfer, and all kinds of shaped edge banding, which can seal the hot wood foil with different patterns on all kinds of curves and shapes of various boards at one time. Different processed boards are sent into the working area by the conveyor belt to be processed, and above the conveyor belt, the boards are firmly positioned by the pressure roller with special structure, so that when the processed parts pass through the milling, grinding and hot stamping stations, there will be no loosening and no scars will be left behind. The following is a small introduction to the heat transfer sealing machine row of drilling and punching operation process:

1, will be classified in accordance with the specifications of the size of the plate, punching holes before the panel, side panels, etc., must be selected face, the plate must be light to hold and put

2, with the width of the number of largest number of plate sizes to customize the sub;

3, the first use of flat drills and vertical drills to play all the big flat buckle, the same The same system after the holes, such as the need to mobilize the system, adjust the hole position after the operation as above;

4, to the width of the drawer sides of the board as the size of the benchmark, the left and right custom sub; the two side panels of the thick skin together and placed in the middle of the position of punching holes, drawer panels left and right system are increased by 10mm and then put on the platform to punch holes;

5, each time to mobilize the system or change the drill or switch the button of drilling position, should be to the Machine self-check, when the machine appears abnormal, should immediately press the emergency stop button, shut down the machine in time.

6, after drilling the hole to put all the plates on the cart, do not fall, and then according to the plate size categorized stacked together;

7, turn off the row of drills power supply, the machine on the saw foam blow clean.