Method for manufacturing firewood stove

Firewood stove is a traditional cooking tool, and the manufacturing process requires some skill and patience. This paper will introduce the manufacturing method of firewood stove to help readers understand the manufacturing process.

Determine the construction location

Firstly, determine the construction location, open the flue and build the chimney. Mark the ground to determine the position, and mark the wall to determine the height. Excavation of smoke exhaust pipes in the wall. Build a chimney outside the house. Cut the basic frame of the firewood stove with bricks on the cement slurry.

Thermal insulation and refractory structure of hearth and furnace surface

Thermal insulation and fireproof structure of furnace cavity and furnace surface. Fill the insulation material to protect the broken sand and brick sand used in the furnace, compact the refractory mud above the furnace with a pot, and flatten the refractory mud.

Construction of warm water mouth and pot mouth

Construction of warm water port and boiler port. Heat preservation materials and refractory mud have been put in the pot before construction. The position where the pot contacts the refractory mud is surrounded by steel bars to ensure that the pot mouth is firm. Smoothing the surface of the stove with mortar is generally 78cm high.

Decorative tile

Decorate with ceramic tiles and install the flue baffle of the oven door.

Wait fifteen days before using it.

You need to wait fifteen days before using it.