Architectural line drawings how to turn into illustrations - PS how to draw illustrations, seek steps!

ps how to convert the picture into an illustration style photo

The setup requires five steps, as follows:

1. First of all, in photoshop to open the picture you want to modify, according to their own needs to do some basic and simple modification, trying to make the original picture looks beautiful.

2. Immediately after the selection of the Filter menu, and open Photoshop's oil filter, here the parameters are not fixed, according to their own preferences to set.

3. Next superimposed on the CameraRaw filter, which can also be found in the Filter menu, the parameters are still not fixed, according to their own need to adjust the appropriate effect. After this step, you get a basic draft line.

4. If you want to picture more delicate and more like illustration a little bit, you can key, replaced by the anime material you want, of course, not all the pictures are applicable to this step, but if the technology is good, you can play the effect of the real.

5. Finally adjust the unsaturation of the picture, you can copy a few layers to do the effect of different strengths, and then use the opacity of the layer to control the effect, after the completion of the film can be stored, the following picture is the completion of the effect.

How to use PS to draw illustrations, seek steps!

1, open PS, a new file selection with 300 resolution drawing, later if you want to print out are convenient.

2, a new layer drawing, select the square head brush, remember to save the file at any time, the brush in the text after the download of the network disk.

3, to fill the background of a color draft on the top, according to the main color you want to paint to fill the color gray, saturation is not too high, painting silhouette will be the initial color, color can also go to find reference.

4, and then layered silhouettes, with a hard pen + pen tool to draw (you can also use the lasso tool to outline the shape and then fill the color, the initial color scheme I tried a variety of options, and finally selected their most satisfactory in-depth), in the layer on top of a new black and white adjustments to the layer can be opened at any time to observe the picture of the relationship between the sketch, so as to avoid too much color and ignored the picture level.

5, lock the transparency of the layer, directly with the gun brush in the current layer above the painting; new layer, create a clipping mask, and then in the new layer above the painting.

6, the addition of auxiliary elements, leaves, swallows interspersed with the addition of leaves with a hard-edged round brush, painting, pay attention to adjust the brush size and color. The bottom layer of leaves, with the lasso tool to outline the approximate shape, and then use the airbrush to paint the color changes, and then use the eraser tool to select the hard side of the circle, repair the shape.

The center and the top directly with a hard edge round brush. Swallow with the pen tool to outline the shape, and then copy more than one, adjust the size and color of the top of the leaves and swallows to do a kinetic blur as well as Gaussian blur, depth of field effect to enhance the picture level.

7, copy the layer to be reflected, and then Ctrl + T vertically flip the layer, and then adjust the location, lock the transparency, suck the picture a little deeper color fill, and then use the airbrush to draw the transition. Select the paint tool, select the volume of paint, and then close to the reflection of the deer gently painted, pay attention to the strength and direction, wipe out the changes.

8, to strengthen the visual center, a new layer (layer of the mixing mode to highlight), and then select the gun with dark colors to darken the picture around the bright colors to brighten the middle to increase the contrast (light layer, with dark colors will change the dark, with bright colors will change the bright part of the bright light).

extract the three methods of line drawing

(1) import material illustration - copy a layer of backup - right-click to convert to a smart object - blend mode selection division (when the color of the upper and lower layers of the same color to white) - Filter -Blur - Gaussian Blur - by adjusting the radius to change the width of the line (at this time to get a colorful line) - stamping the current effect - adjust the layer - black and white (or Ctrl + Shift + U to remove the color)

(2) through the Quick Mask to extract the line drawing: Ctrl + A - Ctrl + C - Q to enter the Quick Mask - Ctrl + V - Q to exit the Quick Mask - Ctrl + Shift + I to enter the Quick Mask. Ctrl+Shift+I Inverse Selection - New Blank Layer - Fill with Black Line Drawing - Ctrl+D Cancel Selection

(1)Import the picture material - Duplicate one layer - Remove Color -copy a layer - Ctrl + I color invert - blend mode to color lightening (brighten the bottom of the image, to generate the effect of all white) - Filter - Other - Min. -Adjust the radius to 1, retain the roundness - OK - stamp a layer

(2) to remove impurities: Adjustment Layer - Selectable Color - Select White - Reduce the black information

(2) to remove impurities: Adjustment Layer - Selectable Color - Select White - Reduce the black information

(3) deepen the line drawing: adjustment layer - color gradient - adjust the modification - stamp a layer

(4) extract the line drawing through the Quick Mask: Ctrl + A - Ctrl + C - Q into the Quick Mask-Ctrl+V-Q to exit the Quick Mask-Ctrl+Shift+I to invert the selection - a new blank layer - fill the black line drawing-Ctrl+D to cancel the Selection

Import the material - copy a layer - right-click to convert to a smart object - Filter - Other - High Contrast Retention - Radius select a value between 0.6 ~ 1 -OK

Method 1: Select Threshold in the lower right corner - Adjust the parameters (the second method to get too many jagged line drawings)

Method 2: Duplicate a layer - Blend Mode to Divide - Filter - Blur -Gaussian Blur

Method 3: Duplicate a layer - blend mode to Color Lighten

Stamp a layer - through the Quick Mask to extract the line drawing: Ctrl + A - Ctrl + C - Q Enter Quick Mask-Ctrl+V-QExit Quick Mask-Ctrl+Shift+I Invert Selection-New Blank Layer-Fill with Black Lineart-Ctrl+D Deselect Selection

Mask one layer-Extract Lineart by Quick Mask:Ctrl+A-Ctrl+C-Q D to deselect the selection