Aiming method of center-pull slingshot

The aiming method of a center draw slingshot is as follows:

1. Determine the target: first of all, determine the target you want to hit. This will help you adjust the height and direction of your aim.

2. Adjust the slingshot: Adjust the tension of the slingshot according to the distance and size of the target. Targets that are farther away require more tension, while smaller targets require finer aiming.

3. Determine the point of aim: Determine the point at which you need to aim, usually the center of the target or somewhere close to it. This point should be on the extension of the slingshot's trajectory.

4. Aim: Aim the slingshot at the point of aim while keeping it steady. You can use your non-dominant hand arm to support the slingshot to make it more stable.

5. Firing: When you are sure your aim is accurate, slowly pull the slingshot until it ejects the projectile. Be careful not to over-tension the slingshot, as this may cause the alignment to drift.

6. Calibrate: If you find that your aim is off target, adjust the point of aim and try again. Repeat this process until you hit the target accurately.

Overall, aiming a center-pull slingshot requires attention to accuracy and stability, and requires repeated practice to master.