How to weave slippers with wool?

Wool knitted slippers can make good use of waste wool to realize "trade-in", and can also prevent the waste of old wool and zero line. Strictly speaking, the wool slippers shared today are not slippers, but should be called wool shoes, because the heels are blocked, unlike slippers, the heels are exposed. But it will be comfortable to wear at home, especially in winter. The following is a detailed knitting tutorial. I hope you like it.

Warmth brand wool woven slippers weaving technology: 1. Woven slippers: (two colors of wool, red and yellow).

1, red wool starts with 6 stitches and weaves the first row; When knitting the second row back, don't knit the first stitch, add a stitch before the last stitch, and then knit the last stitch; Go back to the third row and don't knit the first stitch. At this time, it is already 7 stitches.

2. At the beginning of the fourth line, use yellow wool, slightly tighten the red line, pull it back, and start knitting with yellow thread across the red line. Take off the first stitch directly and don't knit; The second needle began to weave yellow thread. At the penultimate stitch, add one stitch, and then knit the last stitch. Go back and knit the fifth line, but don't knit the first stitch. There are always 8 stitches at this time.

3. At the beginning of the sixth line, first pull the yellow line to the back and press (cross) the sixth line with the red line. The method is as above. Teach you how to weave slippers with wool. 4. Repeat this until it is about 54 stitches (you can measure the edge of the needle with the sole, tighten it a little, and measure half the sole-the midline is separated, and only measure half the edge. ), began to shuttle the front toe part of the shoe. Take the yellow line as an example. Weave the first yellow thread first, and then come back and weave it according to the original method. Don't knit the last four stitches, knit with red thread. At this time, don't add needles when knitting red thread (then the front will be flat and not sharp). ), and then go back to knitting until there are 4 stitches left in the yellow thread just now, and then change to yellow thread knitting, so that after weaving 8 small pieces (5 stitches each, 40 stitches * * *), the remaining 10 stitches will not be reduced. Remember to change the thread and weave three times back and forth (yellow-red-yellow, red in the middle). Warm brand woolen slippers tutorial teaches you how to weave slippers with wool warm brand woolen slippers tutorial 5. After weaving the middle part, the red thread began to shuttle back. That is, when knitting a red thread, the last dozen stitches are knitted first, and then the remaining five stitches (red) are knitted together. After knitting these five stitches, immediately change to yellow thread to knit the remaining five stitches (yellow) in front, and so on, until all 40 stitches of the front shuttle are knitted. Warm brand wool slippers tutorial 6. After all the remaining 40 stitches in the middle are knitted, pay attention to the first row of stitches, that is, the place where the original stitches were added has now become the last two stitches, and be careful not to pull too tightly. Too tight edges tend to make the upper smaller and asymmetrical. The method of weaving back has not changed. In this way, until all the stitches are closed and broken, there are only 6 stitches left. Now the shoe face is like a bat spreading its wings. Teach you how to weave slippers with wool, teach you how to weave slippers with wool;

You can weave the lining with old thread or pure wool. Generally, it is made of three strands of coarse wool, and the knitting method is the same as that of the surface, but the number of stitches is different. Start with 2 stitches and compare the width with the face at the right time. About 20 stitches are in front of the shuttle, leaving 3 stitches at a time, and the last 5 stitches are returned to the shuttle. These 5 stitches don't need to be woven repeatedly. If you don't like the thick lining, you can adjust it appropriately.

Third, put on your shoes:

1, face first. Face the front of your face to the bottom of the sole, find the middle position of the top of the sole, and aim the front of your face at the front of the sole (don't tilt). Fix the front part with two lines to avoid tilting when straightening other places, and then start from the back along the edge with strong lines. 2, and then to lining, the method is the same as above. 3. Then, use an old sweater to cut out a pair of shoe pads (you can also use thread-knitted insoles) and sew them on the soles. 4. Finally, turn the lining over, then turn the surface over, and a pair of wool slippers will be finished.

Presumably most people have worn sweaters or slippers knitted by their mothers. I must feel that it will be much warmer all winter after wearing it! Preparation materials of wool woven slippers: wool, soles, crochets and black clips are the materials to be prepared for wool woven slippers. The color of wool can be matched according to your own preferences. It is best to knit the sole with wool with three threads, so that the knitted sole is thicker and more comfortable to wear! Wool woven slippers can choose waste wool to weave, which can save new wool.

Steps of knitting slippers with wool soles: The main process of hand-knitting slippers is to make a group of buttons and connect them to form a pair of shoes. First, make a pair of soles with sweater needles (generally starting with six pairs of needles, first knit a row of flat needles, second knit a row of flat needles, pick a needle, third knit a row of flat needles, fourth pick a needle and make a needle. Note that in the second row, one stitch is knitted first and then one stitch is selected, and then these steps are repeated in turn. Until you weave a pair of soles, you can add needles on both sides according to the shape of the soles. Hook the knitted sole along the edge with a crochet needle. Here, the short needle method is used to hook three times in a row. Please enjoy the beautiful pictures of wool slippers below!

Steps for knitting slippers with wool uppers When knitting slippers by hand, the toes are facing yourself. Leave a line slightly longer than the sole. Depending on the size of the sole, you can start sewing 5, 6 and 7 stitches. Don't tilt the sides, but be flat. The first needle is short and separated by a braid, the second needle is long (that is, the big needle) and separated by a braid, the fifth needle is long, and so on. Hook a short needle at the end, then hook the remaining thread out of the short needle loop and tighten it. Again, the first needle of the long needle in the second row is hooked in front of the big needle in the first row, and the second needle is hooked in the knitting needle below (if the wool is fine, both the lower needles can be hooked, which will be thicker). ) The first needle of the long needle in the third row is the same as above, the second needle hook is in the middle of the two long needles in the lower row, and so on.

Crocheting in the process of knitting slippers with wool: The last step of hand-knitting slippers is crocheting. Choose your favorite pattern according to your personal preference, choose a pattern suitable for the size of the sole, and tick as much as possible in the middle. The pattern of average size begins after three large needles. After hooking, hook one or two rows of short needles and you're done. If you are not clear about the method of weaving slippers by hand, you can consult your parents with the text description. Of course, you can also leave a small message.