Installation strategy of stair step lamp

The stair step lamp is a strip lamp installed at the foot of the stairs, which is suitable for families who pursue life sentiment and have enough budget choices, and can also be set to be inductive, so that if they need to go up and down the stairs at night, they can be lit in time. This article will introduce the installation and wiring methods of stair step lights for everyone.

Height selection

The stair tread height is generally between 18-20cm, and the stair height in public places is generally between 13- 16cm. Just choose according to these parameters.

Hook foot problem

If it is installed correctly, it will not be hooked. It is suggested that the appropriate installation height of step lamp should be selected according to the situation of stairs and steps. In addition, before leveling, wooden boards with a width of about 10 cm should be installed on the front and vertical surfaces of each step.

Wiring method

First, leave the embedded line of the step lamp at the corner of the bottom floor. Then when wiring, be sure to pull from the first staircase to the top step. Finally, just put the ribbon in the ladder and remember to put the thread of the ribbon on the main line, and you're done.