How to make self-made luminous bleaching method

1, the manufacturing method of luminous float is relatively simple. First make a wooden stick in the shape of a luminous float, then put the light guide rod in it, and finally fix the battery.

2. First of all, you need to buy accessories, such as button cell, waterproof diode lamp and light guide rod. Next, you need to start the manual operation. First, you need to find a wooden stick with a diameter of 2 cm and a length of about 10 cm. Because it needs polishing, you'd better leave enough room for operation. First, use a tool to cut the wooden stick into the approximate shape and outline of a normal float.

3. Then smooth the surface with sandpaper to make it look more beautiful. After grinding, apply 502 glue on the outside to increase its firmness and lay a good foundation for the next step.

4. Use a hand electric drill with a suitable drill bit to drill a gap suitable for placing button cell and waterproof diode lights in the middle of the polished wooden stick, and then coat 502 glue inside for waterproofing. A small hole is drilled at the other end, which runs through this end and is used to install the light guide rod.

5. Installation begins. Install the light guide rod into a thin sheet and fix it with glue. At the other end, put the waterproof diode lamp and button cell into the gap, aim the lamp cap at the light guide rod, and put it into the battery to test whether it is bright or not.