After the floor of my yard is paved with floor tiles, how can I use cement to joint?

After our courtyard floor is paved with floor tiles, there are still many methods of jointing with cement. After the floor tiles are laid, there will be gaps between them, which can be filled directly with cement. First of all, we need to successfully mix cement and mortar in a correct ratio, cement plus fly ash and sand, which is 2: 1:3 under normal circumstances. We can mix them evenly to tick the seam. Then what method should be used to tick off the seam? We continue to look down.

Because the courtyard floor is paved with floor tiles, it is necessary to keep the jointing beautiful. In order to hook the cement mortar evenly on the inner seam surface of the floor tile, it is necessary to prepare a tool and make a device with the same principle as glass glue. I don't know if you've seen making cakes, but we can use butter squeezing tools to joint cement. It will be very effective to fill the joint of the floor tile by pouring cement into it, but it should be noted that the joint must be cut smaller so that the cement mortar can perfectly hook the joint of the brick.

Or there is another way, you can buy a slightly larger syringe, pour cement into the syringe and aim at the joint of the floor tile for joint filling. This will be slower to operate, but it will also have a very good effect. Cement jointing is a method used by most families. This jointing will not be moldy or cracked, but it is a bit bad. It is expensive and troublesome to prepare. Our usual sewing agent does not need to be prepared, as long as it is bought back, it can be used, which is very convenient. If you can't find a suitable tool for jointing cement, I suggest jointing with caulking agent. Generally speaking, cement jointing is also possible, but we must master the proportion. Cement, fly ash and sand, such a combination will not make them solidify quickly, and jointing is also more convenient. It must be remembered that it should not be too dry. If it is too dry, it will lead to poor jointing.