How to make a gun with Lego?

The steps of using Lego to spell a gun are as follows:

1, a flat beam with a hole of 15, a large curved beam and four black pins constitute the illustrated state. Add a 24-gear to the four black pins to fix them. In addition, two 13-hole flat beams are fixed with long pins before the finished beam, and a long pin, a big pin and a 3-hole flat beam are fixed on the third hole of the flat beam, as shown in the figure.

2. Fix the long pin and the big pin in the fifth hole on the other side, and place the big pin on both sides of the flat beam of hole 15. Take a 9-hole flat beam, with the hole facing upwards, put it in the slot, and put a big pin on the last hole. As shown in the figure.

3, rubber band, rubber band on both sides of the big pin and the big pin on the rubber band form a 9-hole flat beam, and the small pistol is made. Pull the pin and you can shoot.

Lego, founded in 1932, is located in Denmark. Is a world-renowned toy manufacturer. By the end of 2022, Lego has a history of 90 years, which can be traced back to its gold-lettered signboard Lego. The trademark "Lego" has been used since 1932. Its language comes from the Danish word "LEgGOdt", which means "playwell". This name soon became synonymous with high-quality toys produced by Lego in Bilong Toy Factory.