Method for manufacturing chair

The manufacturing method and pictures of the chair are as follows:

1, sketch

We have to draw the shape of the whole recliner on the sketch first.

2. get the materials.

A whole board is divided into several small pieces according to the size of the recliner on the drawing, and then each board is preliminarily processed.

3. underline.

Cut the sketch of the lounge chair 1: 1, take it to the divided wood blocks for comparison, and then take it to the cutting machine for cutting.

Step 4 polish.

Cut the sketch of the lounge chair 1: 1, take it to the divided wood blocks for comparison, and then take it to the cutting machine for cutting.

5. splicing.

The next step is to splice all parts of the recliner on the operating table to see if the docking is smooth and tight.

6. Slot.

We mark the slot position of each joint with a pencil, and then take each part to the machine tool for slot.

7, fixed.

After the slot is opened, the owner drives it into the slot with his own pin, and then evenly spreads glue on the joint to splice and fix all the parts.

8. Cut cowhide.

The tool for cutting pimps is made by the owner himself, and the cutting width can be adjusted, and the blade on it can also be replaced. Usually the thong is coated with a layer of polyurethane after processing, which will make the leather surface look darker, sit softer, have strong water and oil repellency and good water resistance.