Traditional Culture Encyclopedia - Traditional culture - Specific operation steps of ordinary lathe machining thread!

Specific operation steps of ordinary lathe machining thread!

One, analyze the parts drawing

Two, determine the machining steps

Three, select the props and cutting amount

Four, mounting the workpiece

Five, mounting the tool

Six, machine tool adjustments

Seven, the thread turning operation methods and steps

Eight, the thread turning feed mode

Processing thread (including worm, hob, etc.) type surface of the specialization of the machine tool. Mainly used in the manufacturing of machines, tools, gauges, standard parts and daily utensils.

Safety technology

1, the equipment must be dedicated and licensed.

2, to follow the taper thread socket machine safety regulations.

3, must be familiar with the understanding of the taper thread lassoing machine equipment structure, principle and its performance.

4, the operation of the energy to concentrate, is strictly prohibited laughing and joking.

5, before the use of threading machine, to do a good job of equipment inspection, electrical inspection work, find problems, find hidden dangers, put an end to unsafe factors, to prevent accidents.

6, set the wire must ensure that rebar clamping firm, to prevent injuries to the rebar.

7, set the wire for cooling work, and at the same time do a good job of safety protection, to prevent the iron chip splash injury.

8, machinery in the process of running, it is strictly prohibited to sweep the blade above the accumulation of debris, miscellaneous dirt, found that the working conditions should be stopped immediately to check, repair.

9, it is strictly prohibited to exceed the equipment performance requirements of the operation, in order to prevent accidents.

10, the strict implementation of the "cross operating law policy" to ensure that the machinery is in good working condition.

11, is strictly prohibited in the process of mechanical operation without stopping the equipment maintenance operations.

12, the work is completed, to disconnect and lock the gate box.

Reference source thread processing machine tools - Baidu Encyclopedia