Traditional Floor Polishing and Waxing Method

Traditional floor polishing and waxing method is a method of treating the floor with machines and hand tools to make it smooth, shiny and protected. Here are some steps to achieve the traditional floor polishing and waxing method:

1.Cleaning the floor: Firstly, the floor needs to be cleaned, including sweeping and vacuuming to make sure that the surface of the floor is clean and free from dirt, debris and sundries.

2. Sanding the floor: next use a floor sanding machine to sand the surface of the floor with an adhesive pad or abrasive paper. Start with coarse sandpaper and then finish with fine sandpaper to get a flat surface.

3. CLEANING THE FLOOR: After the floor has been sanded, the floor needs to be cleaned to remove any dust and debris from the surface.

4. Wax the floor: Next, mix the waxing agent with water and use a sponge or brush to apply it evenly to the floor, using as little wax water as possible. Wait for the wax to dry and polish the floor several times to get a fine finish.

5. Carve lace: After the floor is polished, you can use hand tools to create lace decorative effects, such as drawing decorative borders around the floor.

6. Polishing again: finally, the floor is polished again using a polishing machine to get a full, smooth, shiny and protective finish.

In short, the traditional floor polishing and waxing method requires patience and effort, but it can see amazing results. This method not only extends the life of your floor, but it also improves the beauty and value of your floor.