How to install sliding doors

1, slideway installation

Usually, when installing a sliding door, a slideway should be installed. When installing the slideway, the door beam needs to be fixed according to the requirements of the width and opening direction of the door opening, and usually it needs to be fixed on both sides with the center of the width of the door opening as the benchmark. It should be noted that the left and right heights of the joint between the slideway and the door beam need to be consistent, and the center line of the slideway needs to be consistent with the size of the painted external wall, and its size is preferably half of the thickness of the fan, 2cm more.

2, door leaf installation

The door leaf and pulley system of sliding door are usually directly processed and formed in the factory. After the upper slideway is installed, the pulley can be put into the slideway, and then it can be placed vertically under it by hand or other lifting tools. At the same time, the screws on the door leaf are inserted into the bolt holes installed on the pulley and fixed.

3. Mense

When the door leaf of the sliding door is installed, it is necessary to start installing the door suction, and it is necessary to weld an angle steel stopper at the bottom or inside of the upper slide at a distance of 10mm from the pulley edge to limit the opening area of the door leaf within its effective range. The contact point between angle steel and pulley must be set above 20mm, and hard rubber pad can be used as buffer in the middle.

4. Installation of guide cake and door stopper

After the door stop is installed, the sliding door guide block and the door stop can be started. The center line of the guide cake can be located according to the actual position of the flat steel under the door leaf. The guide cake should be exposed from the ground about 10 ~ 15mm, with a spacing of 500 mm When installing the lower limiter, push the door leaf to the position 10 ~ 20mm away from the outside, and then fix the limiter with screws.

5. Installation of door hardware fittings

Finally, the installation of hardware accessories for sliding doors, mainly including handles and locks. The sliding door will not look more beautiful until the installation and adjustment of the sliding door are correct and the installation height and position of the accessories are correct.

Extended data

Sliding door is a common family door, which refers to a door that can be pushed and pulled. With the development of technology and the diversification of decoration means, the function and application scope of sliding doors are constantly expanding from the traditional panel to glass, cloth, rattan and aluminum alloy profiles, from sliding doors and folding doors to partition doors.

Sliding door classification

According to the different ways of use, sliding doors can be divided into: electric sliding doors, manual sliding doors, automatic sliding doors and so on.

According to different applications, sliding doors can be divided into factory sliding doors, industrial sliding door sliding doors, workshop sliding doors, prison sliding doors, wardrobe sliding doors and so on.

According to different materials, sliding doors can be divided into: metal sliding doors, glass sliding door, color steel sliding doors, aluminum alloy sliding doors, solid wood sliding doors and so on.

References:

Baidu encyclopedia-sliding door