Traditional Culture Encyclopedia - Traditional culture - How to tie the shoelaces of board shoes?

How to tie the shoelaces of board shoes?

Shoes with double fork system shoelaces.

Double fork method: one end of the shoelace passes through the hole at the lowest end, the other end passes through the adjacent hole on the same side, and the two ends of the shoelace are aligned and straightened. The two ends of the shoelace pass through the two holes at the lowest end of another row of holes in reverse parallel from the inner side, then obliquely pass through the two adjacent holes in the opposite row from the inner side, and then cross upwards in turn. Finally, the end of the shoelace with the upper hole passes through the holes in the other row from the inner side.

X-shaped system method: the two ends of shoelaces go straight through the inside of the bottommost holes in two rows, adjust the position, align the two ends, cross each other into an X shape, go through two opposite holes, and then go straight through two adjacent holes, and repeat the operation.

Daily maintenance methods of board shoes

1. The outsole and sides (non-nylon parts) of shoes can be cleaned by spraying a little collar. After more than ten seconds, gently brush with a soft toothbrush, and don't brush for too long.

2. Pay attention to the position of eyelets when cleaning to prevent the metal eyelets from fading and making the vamp dirtier. Transparent nail polish can usually be applied to eye holes to prevent metal oxidation. ).

3. After brushing, wash off the foam with warm water or cold water in time to minimize the erosion of shoes by chemicals.

4. Wipe off the residual water with a dry rag immediately after cleaning. If there is an air cushion, pay attention to wipe off the water around the air cushion, so as to avoid the chemical change of some glue that decomposes after long-term contact with water and lead to glue opening.