The correct manufacturing steps of cloth coasters are as follows

The correct manufacturing steps of cloth coasters are as follows:

Preparation materials: 2 pieces of cotton cloth, thin cotton 1 piece, package 1 piece.

Production steps:

1. Cut two cotton pieces and a thin cotton piece. The required size is 14cmx 14cm.

2. Leave the outer edge of the outer cloth about 8 mm before sewing.

3. Fix the cloth and thin cotton cloth on the upper surface with a pin. The fixed position should be at the line drawing place, and the outside of the line should be reserved for binding.

4. After fixing, wrap a line around the pattern on the outer cloth to add some three-dimensional effect.

5. Start packing. Sew the packing cloth on the face cloth first.

6. Put the cloth below at the bottom, fix the wrapped nest with a pin and sew it.

7. The picture above shows the front of the roller coaster after its completion.

8. This is the reverse of the roller coaster.

9. You can put your favorite cups.