Waterproofing solutions for houses

House waterproofing solutions are traditional methods, the latest methods and so on.

1, the traditional method

Building body leakage, that means that the waterproof layer to deal with the problem, the waterproof layer of hard tiles on the outside, according to the traditional method is to pry the outside tiles, and then digging up the waterproof layer, redo a new layer of waterproofing, and then resurfacing tiles. Which labor costs, material costs, the time used on the consumption is very large.

2, the latest method

The traditional concept of waterproofing leakage is where the leak where to fill, and the latest waterproofing leakage method is to abandon this traditional concept, waterproofing layer leakage, do a good job outside the tiles waterproofing leakage prevention, as long as the outside of the tiles surface layer of waterproofing, waterproofing effect is the same.

Waterproof leakage construction methods:

1, the bathroom floor first to do leveling, for newly renovated or redecorated users. If you want to replace the bathroom tile, after the original tile chiseled away, be sure to use cement mortar to level the ground before doing waterproofing. This can avoid waterproof coating due to uneven thickness and leakage.

2, the joints should be painted in place between the bathroom wall and the ground seams and water and sewage pipes and the ground seams, is the most problematic place. In construction, be sure to urge the decorator to deal with these edges and corners of the place, all waterproof coating must be painted "in place".

3, wall treatment is also very important in the general bathroom waterproofing treatment, the wall should also do about 30 centimeters high waterproofing coating, in order to prevent the accumulation of water through the wall. But if the bathroom wall is non-load-bearing light wall, the entire wall should be coated with waterproof coating. If your home uses a two-panel shower screen, the two walls that are connected should also be coated. If you use a bathtub, the wall adjacent to the bathtub, the height of the waterproof coating should also be higher than the top edge of the bathtub.