Bottom filter fish tank how to adjust the water level fish tank how to change the water

Now many people for their own lives is more important, many friends, in order to make their families look more alive, will choose to put a fish tank indoors to raise fish, and in the fish must pay attention to the fish tank, the adjustment of the water level to avoid too much water or too little water. So how to adjust the water level of the bottom filter fish tank?

Now a lot of people for their own lives is more important, many friends, in order to make their families look more alive, will choose to put a fish tank indoors to raise fish, and in the fish must pay attention to the fish tank, the adjustment of the water level to avoid too much water or too little water. So how to adjust the water level of the bottom filter fish tank? How to change the water in the fish tank? Here we come together to understand it.

How to adjust the water level of the bottom filter aquarium

Bottom filter aquarium water level adjustment methods: overflow bottom filter, in the overflow area of the desired height of the water level to the partition glass openings to reduce the overflow water level on the line. Siphon bottom filter, pump off a little water in the tank on the line, pay attention to may have to adjust the float valve position. The same process of bottom filter, directly draw off a little water in the tank on the line. Steps:

1. After removing the cover, pull out the outlet pipe (the one in the center) (don't worry about the water leaking down).

2, the outer tube (that is, the outermost tube) in the direction of the slide out (generally to the bottom to pull out).

3, measure the depth to be sawed off (it is recommended that the height of the downpipe is less than 1-2CM on the bottom of the edge of the package as well) can be cut off directly with a hacksaw.

4, in order to beautiful and adjust the water level, in the cover to play 2 holes a temperature probe is put a wear oxygen pipe, in the overflow area put the oxygen head to use the principle of gas lift to reduce the water level.

How to change the water in the fish tank

Using the principle of water pressure, use a hose with one end inserted into the fish tank, and the other end of the hose low Inserted into the water change basin. Then suck the lower end of the hose mouth, the tank inside the water will flow down. Then slowly pour the prepared new water into the fish tank.

It is not recommended to do a full tank water change in a large aquarium. Full tank water change should only be done after the fish is cured of the disease. In normal management, you should try to avoid full tank water change for large aquariums. Because the fish have already adapted to the water quality in the tank, a full tank water change will make the water quality suddenly change, making it difficult for the fish to adapt, and the old water environment will also be damaged.

Everyone in the use of fish tanks, we must pay attention to the method, at the same time to pay attention to the method of water change in the tank, so that you can provide a good environment for the goldfish in the fish tank. The above is about how to adjust the water level of the bottom filter fish tank and how to change the water in the fish tank, you can learn more about some of the relevant fish farming methods, so that their goldfish to raise more vibrant.